metal coils steel and aluminum
National Coil Coating Association

The Process

The Most Advanced Method For Coating Metal

Coil coating is a continuous, automated process for coating metal before fabrication into end products. The steel or aluminum substrate is delivered in coil form from the rolling mills. The metal coil is positioned at the beginning of the coating line, and in one continuous process, the coil is unwound, pre-cleaned, pre-treated, pre-primed, and prepainted before being recoiled on the other end and packaged for shipment. All of this happens at up to 700 feet per minute!

 

The following steps take place on a modern coating line:

  • Stitching the strip to the previous coil
  • Cleaning the strip
  • Power brushing
  • Pre-treating with chemicals
  • Drying the strip
  • Applying primer on one or both sides
  • Curing (often only 15 to 60 seconds!)
  • Cooling the strip
  • Top coating on one or both sides
  • Second curing
  • Cooling down to room temperature
  • Rewinding of the coated coil

 

Watch The Video >

 

Coil Coating Line

Like Us
Share This Page
Share on Facebook
Share on Twitter
Share by Email